USA - English
Search

DPM-USB Dual-Port Memory to USB Converter

DPM-USB ORTEC Dual Port Memory to USB Converter
  • Simple Install – Connect the cable and update the drivers!
  • No external cable required – powered from the USB.
  • USB 2.0 Compatible.
Since the inception of the personal computer, ORTEC has provided MCBs which couple to the PC via a flat ribbon cable to an ISA card in the computer. The ISA (Industry Standard Architecture) Bus is now almost completely extinct. Today’s modern PCs often do not have option slots of any type, but all have USB ports. An enhancement to the CONNECTIONS product family, the DPM-USB interface provides a means to convert the ORTEC Dual-Port Memory (DPM) communication to USB.

  • Literature +

  • More Information +


    For ORTEC MCA owners, the conversion from the ORTEC DPM to USB preserves their hardware investment and allows PC upgrades. The model DPM-UPGRADE-USB includes the hardware for the USB connection and the driver update for the software. The upgrade provided with the model DPM-UPGRADE-USB will also update drivers for any user-developed programs written using the CONNECTIONS Programmer’s Toolkit (Model A11-BW).

    The model DPM-USB connects directly to the 37-pin D-connector on the rear panel of ORTEC MCA hardware (NIM and non-NIM) and to the USB port of a PC. The Model DPM-USB is fully compatible with USB 2.0 and operates at a maximum data transfer rate of 12-Mb/second.

    The DPM-USB interface converter adapts any of the below listed ORTEC MCB instruments to a PC with an available USB port. Installing the model DPM-USB is accomplished by simply plugging in the connectors. Be sure to install the software and any upgrades before connecting this interface.

    Compatible ORTEC models: 919, 920E, 92X, 92X-P (NOMAD), 919E, 921, 92X-II, NOMAD-Plus, 920-8, 921E, DSPec, OCTETE-PC, 920-16, and 926.

    Example:
    For remote operation, ORTEC offers the model USB-CONC-110 or model USB-CONC-220. These units will interface USB connections to the Ethernet using TCP/IP protocols. The USB-CONC-110 or USB-CONC-220 provides connections for up to 5-each USB devices.

  • Specifications +


    Input/Output Female 37-pin D-connector with captive 5 meter (15-ft.) USB cable.
    Power Required Provided by the USB connection.
    Dimensions 2.75-in. (7-cm) W, 2.75-in. (7-cm) D, and 0.75-in (1.9-cm) H 37-pin D-connector with captive 5-m USB cable.
    Net Weight 1-lb. (0.45-kg), shipping weight 5-lb. (2.27-kg).

  • Ordering Information +


    Model Description 
    DPM-USB Dual-Port Memory to USB Interface Converter
    DPM-UPGRADE-USB DPM-USB and CONNECTIONS Driver Update
    DPM-M32-USB DPM-USB with MAESTRO software
    Accessories  
    C-USB-HUB-4B 4-port powered USB hub
    C-USB-HUB-7B 7-port powered USB hub
    USB-CONC-110 5-port USB to Ethernet converter – 110V/60Hz
    USB-CONC-220 5-port USB to Ethernet converter – 220V/50Hz