 |
Home | Applications | Contact Us | |
| Products | Service | Training | ||
|
Home | Applications | Contact Us | |
| Products | Service | Training | ||
|
Download PDF
|
495 Power Supply Specifications PERFORMANCE INPUT 103–130 V ac, 47–63 Hz, 0.95 A maximum input current for 6-A output current. (NOTE: Maximum input current may exceed the capacity of some NIM bin power supplies, necessitating operation at reduced output current.) OUTPUTS +6 V or –6 V (adjustable from 5 to 6 V) at 0–6 A (polarity PWB selectable).REGULATION AND INSTABILITY <±0.1% for specified line and load ranges. OPERATING TEMPERATURE RANGE 0 to +60°C.TEMPERATURE COEFFICIENT ±200 ppm/°C maximum. NOISE AND RIPPLE <30 mV peak-to-peak at 20-MHz bandwidth.OUTPUT IMPEDANCE <0.12 W for f <100 kHz. RECOVERY TIME <2 ms to within ±1% after full-load to no-load, or vice versa.TURN-ON, TURN-OFF TRANSIENTS <5% of nominal output. PROTECTIONOver-Voltage Accomplished with latching crowbar set to 6.8 V ± 0.5 V. Short-Circuit and Overload Accomplished with automatic recovery after fault removal. Also included are Fused Input and Input Line Filter protection.
MECHANICAL WEIGHT DIMENSIONS NIM-standard single-width module 3.43 X 22.13 cm (1.35 X 8.714 in.) per DOE/ER-0457T.ORDERING INFORMATION
|
|
