428 Detector Bias Supply
- For use with silicon surface barrier detectors
- 0 to ±1 kV
- Two individually adjustable outputs
- 1.3 MW output impedance
- Current monitoring capability
- Precision dials
The ORTEC Model 428 Detector Bias Supply
provides bias voltage of either polarity for two semiconductor detectors, and the current
in each detector is externally monitored through jacks on the front panel. The outputs are
short-circuit proof, with an impedance of approximately 1.3 MW, and each has a range from 0 to 1000 V. These
outputs are selected independently by 10-turn direct-reading potentiometers. Constant bias
voltage is supplied by high-grade circuits with <0.0002% noise and ripple.
This detector bias supply is compatible with
all ORTEC preamplifiers that have provisions for an external detector bias voltage.ORDERING INFORMATION
|
Model |
|
Description |
|
428 |
|
Detector Bias Supply |
|
C-36-12
|
|
RG-59A/U 75-Ω Cable with two SHV female plugs, 12-ft length |
|
