Preamplifier Power Output - ORTEC Model 4003

4003-fp.jpg (18891 bytes)

4003-rp.jpg (15517 bytes)

4003 Preamplifier Power Output

Convenient NIM bin power outlet for 6 preamplifier
Individually filtered outlets ensure low noise
Standard 9-pin D connectors deliver ±12-V and ±24-V power

The Model 4003 Preamplifier Power Output module provides a convenient way to deliver dc power from a NIM bin to preamplifiers when the appropriate connectors are not available on other modules installed in the bin. Up to 6 preamplifiers can be accommodated via the standard, 9-pin "D" connectors on this single-width NIM module.

Low-noise preamplifiers require dc power that is free of interference generated by other modules inserted in the bin. The Model 4003 protects this low noise capability by filtering the power lines separately at each connector. Figure 1 illustrates the highly-effective p filter incorporated at each connector.

Each preamplifier power plug delivers ±12-V and ±24-V dc power on the pins designated in Table 1. The Model 4003 derives its power from a NIM bin/power supply such as the Models 4001A/4002A, 4001A/4002D, 4001C/4002D, 4001C/4002E, 4001M, or 4006.

4003-f1.jpg (16029 bytes)

Fig. 1. A separate p filter is employed at each output.

ORDERING INFORMATION

Model		Description
4003		Preamp Power Output


		Home \| Applications \| Contact Us
		Products \| Service \| Training