 |
Home | Applications | Contact Us | |
| Products | Service | Training | ||
|
Home | Applications | Contact Us | |
| Products | Service | Training | ||
|
Download
PDF
|
4002A 96-W Power Supply for NIM Bins INPUT
Frequency Range 47–63 Hz. Input Current At 120 V ac is typically 1.8 A rms with a 96-W load (43% efficiency).DC OUTPUT +12 V at 2 A, –12 V at 2 A, +24 V at 1 A, –24 V at 1 A. Combined maximum output power 96 W at +50°C. Derates to 72 W at +60°C. 117-VOLT AC OUTPUT Limited only by the supply fuse when operating from 100 or 120 V ac. Output is limited to 50 VA at 96-W dc load while operating from 220 or 240 V ac.REGULATION <±0.05% over combined range of zero to full load and input voltage of 88% to 110% of rated input over any 24-hr period at constant ambient temperature after a 60-minute warmup. INSTABILITY <±0.3% over a 6-month period at constant line, load, and ambient temperature after a 24-hr warmup.OUTPUT IMPEDANCE <0.3 W at any frequency up to 100 kHz. TEMPERATURE COEFFICIENT <0.01%/°C from 0 to 60°C.NOISE AND RIPPLE <3 mV peak-to-peak, as observed on 50-MHz bandwidth oscilloscope. VOLTAGE ADJUSTMENT ±0.5% minimum range; resettability ±0.05% of supply voltage (typical ±1 V).RECOVERY TIME <50 µs to return to within ±0.1% of rated voltage for any change in rated input voltage and load current from 10% to 100% of full load. CIRCUIT PROTECTION Input power line fused. Power supply is automatically cut off by an internal switch if the temperature exceeds a maximum safe limit. Output current foldback limiting with automatic recovery when demand is removed.DIMENSIONS AND WEIGHT
ORDERING INFORMATION The Model 4002A Power Supply may be ordered separately or assembled with a NIM bin, using the model numbers shown below.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
