425A Nanosecond Delay

 Specifications

PERFORMANCE

DELAY ACCURACY ±100 ps or ±1% for each delay section used.

MINIMUM DELAY (All Switches Out) 2.0 ns.

IMPEDANCE MISMATCH REFLECTION £±2% from any of the delay switches.

CONTROLS

Six slide switches, each with an Out position and an In position, permit selection in any combination for total delay; switches select 1, 2, 4, 8, 16, and 32 ns.

INPUTS

BNC connector accepts signal of either polarity to ±600 V maximum; impedance, 50 W

OUTPUTS

BNC connector furnishes input signals with the delay selected by the switches that are set at IN; impedance, 50 W.

ELECTRICAL AND MECHANICAL

POWER REQUIRED None.

WEIGHT
Net 1.0 kg (2.2 lb).
Shipping 1.4 kg (3.0 lb).

DIMENSIONS NIM-standard single-width module 3.43 X 22.13 cm (1.35 X 8.714 in.) per DOE/ER-0457T.

ORDERING INFORMATION