C Series Annular Partially Depleted Silicon Surface Barrier Detectors from ORTEC

C Series Annular Partially Depleted Silicon Surface Barrier Detectors

Main Application: Backscattering from a collimated source or beam target; angular correlation measurements.

Supplied with T Mount unless otherwise specified. (See mount descriptions.)

*Supplied in T Mount unless specified otherwise by appropriate letter prefix; 4-mm hole is standard, 6- or 8-mm hole or other areas and depths available on special order.

** First three digits of Model No. indicate total system resolution FWHM for ²⁴¹Am, 5.486-MeV alphas, using standard ORTEC electronics and 0.5-ľs shaping time constants. Beta resolution approximated by pulse generator width FWHM.

Total Area Including 4-mm-diam Hole (mm²)	Guaranteed Maximum Resolution (keV)**		Minimum Depletion Depth 100 ľm Model No.	Minimum Depletion Depth 300 ľm Model No.	Minimum Depletion Depth 500 ľm Model No.
Total Area Including 4-mm-diam Hole (mm²)	a	b	Minimum Depletion Depth 100 ľm Model No.	Minimum Depletion Depth 300 ľm Model No.	Minimum Depletion Depth 500 ľm Model No.
50	17	9	C-017-050-100	C-017-050-300	C-017-050-500
150	19	12	C-019-150-100	C-019-150-300	C-019-150-500
300	21	14	C-021-300-100	C-021-300-300	C-021-300-500
450	25	20	C-025-450-100	C-025-450-300	C-025-450-500

Total Area Including 4-mm-diam Hole (mm²)	Guaranteed Maximum Resolution (keV)**		Minimum Depletion Depth 1000 ľm Model No.
Total Area Including 4-mm-diam Hole (mm²)	a	b	Minimum Depletion Depth 1000 ľm Model No.
50	18	10	C-018-050-1000
150	20	12	C-020-150-1000
300	22	15	C-022-300-1000
450	25	20	C-025-450-1000