Vacuum Chamber - ORTEC 808 Specifications

808 Vacuum Chamber

Specifications

CONTROLS

PUMP/HOLD/VENT Front-panel position control for venting or pumping the vacuum chamber. A hold position independently isolates both the pump and the chamber.

OUTPUTS

DETECTOR Rear-panel BNC connector provides for connection from the detector mounted in the vacuum chamber to the preamplifier, which can be mounted to the Model 808 rear panel with a hook-and-loop fastener that is provided with the instrument.

VACUUM Rear-panel vacuum pump connector (Swagelok^Žconnector for 3/8-in. OD tubing) for connecting the Model 808 Vacuum Chamber to a vacuum pump.

ELECTRICAL AND MECHANICAL

WEIGHT
Shipping 9 kg (20 lb).
Net 4.37 kg (9 lb 10 oz) with trays and holder.

DIMENSIONS

Cabinet 20.9 cm (8-1/4 in.) wide by 26 cm (10-1/4 in.) high by 34.3 cm (13-1/2 in.) deep.
Chamber 11.4 cm (4-1/2 in.) wide by 16 cm (6-3/16 in.) high by 15.7 cm (6-3/16 in.) deep.
Sample Trays 10.8 cm (4-1/4 in.) wide by 14 cm (5-1/2 in.) long. Nominal sample size up to 10.2 cm (4 in.). Without tray holder, holds sample sizes up to 4-1/2 in.

RELATED EQUIPMENT

The Portable Pumping Station, Model ALPHA-PPS-115 (or -230), consists of a cart-mounted, rotary direct-drive mechanical vacuum pump to which is attached an anti-backstreaming trap, a thermocouple vacuum gauge, and flexible bellows tubing with appropriate termination for connecting directly to the Model 808 Vacuum Chamber. The Pumping Station requires no assembly.

ORDERING INFORMATION

Model		Description
808		Vacuum Chamber
ALPHA-PPS-115		Pumping Station (115-V ac version)
ALPHA-PPS-230		Pumping Station (230-V ac version)

808rp.jpg (15945 bytes)